Nikon COOLPIX S210 Repair Manual page 105

Items
Lens capacity
Ghost/Flare
Point light source
Surface light source
Distortion
（Design ( ∞ ) W : -1.5%, T : +0.6%）
Dust in a picture
Lens barrel
Zoom / Focus
AF
Distance measurement
operation
Shortest photograph
distance
Normal Normal
Macro
Shooting with a speed
light
Light adjustment accu-
racy
Judgment standards
・ No outstanding ghost/flare.
・ No outstanding flare at the center.
・ No outstanding deformation.
・ No outstanding dust in a picture.
・ When the picture center (within the circle whose diameter is 80%
of the short side) is Zone I and its outside is Zone II, the light
reduction against the periphery must be as follows :
a
Zone Ⅰ 4 or less
Zone Ⅱ 10 or less
a : 1.5% or less
b : More than 1.5% and less than 3.0%
・ No abnormal action (for example, the unit operates one-sidedly or
its operation is not smooth or it is caught).
(As changing the camera's posture, check it in all the directions.) 's posture, check it in all the directions.) s posture, check it in all the directions.)
・ In the case of normal AF: Focus must be fit at the picture center.
・ In the case of the out-of-focus object: Focus must be fit at the 2m
point.
・ In the case of the scene mode: Focus must be fit in the selected
area.
Focus must be fit at the following distance.
・ Z00 ～ Z12 60cm ～ 1m
・ Z00 ～ Z01 10cm
・ Tele-end: 0.5 ～ 2.8m
・ Wide-end: 0.5 ～ 5.3m
In the above range, 0.2 ± 0.5 EV or less
(Shooting mode: AUTO Max. sensitizing when ISO800, Speed
light: Anytime flash)
- R ･ S20 -
b
0
2 or less
INC
VMA22024-R.3749.A
Remarks
Visual observation
Visual observation
Photoshop
CRT monitor
PC
Visual observation
Visual observation
Tape measure
EIAJ chart
Standard reflection
plate