Nikon COOLPIX S210 Repair Manual page 103

INSPECTION STANDARDS
Items
External view
Gap/Difference in
height
Outside and inside
status
Operation/Operability
Operation/Shaking/
Shock
Operability of buttons /
PWS
Judgment standards
・ General components
Gap: 0.2mm or less
Difference in height: 0.15mm or less
(When the lens-barrel is retracted, gap between the lens-barrel
& zoom frame on flattened surface: 0.25mm or less; When the
lens-barrel is extended, gap between zoom frame & name plate:
0.2mm or less)
・Gap between upper (decoration) plate & front/rear covers: 0.2mm
or less
・ When the battery cover is opened/closed:
Gap between side cover & the front/rear covers: 0.2mm or less;
Gap between front & rear covers at the bottom: 0.3mm or less
Difference in height: 0.3mm or less
・ The difference in height for the battery cover must not be
protruded from the front cover.
・ No noticeable damage, stain, sink mark, welded mark,
unevenness, crack or oil exudation.
・ No noticeable noise when pushing the main body.
・ No light leakage or reflection from the inside through the joint
clearance.
(Check it by naked eyes under fluorescent lamp and natural
sunshine.)
・No noticeable leakage of light, when Self/SB/ monitor LCD/
power LED lights up. (Check in the dark.)
・ No irregularities nor irregular noise while operating.
(Shake the camera while operating.)
(Lightly hit the camera onto the Linoleum-laid desk while
operating.)
(Give a palm shock while operating.)
・ No button stuck down.
・ Proper clicking feeling on each button.
・"Click" sound is made before turning on SW.
(Make a check in normal operation.)
(Check it by pushing one-sidedly, pushing lightly, holding down
and pushing with chatter.)
- R ･ S20 -
INC
VMA22024-R.3749.A
Remarks
Visual observation
0.2mm or less;
Secondary battery