Nikon COOLPIX S210 Repair Manual page 106

Items
Guide No. FULL
(ISO100・m)
Recycle time
Wrong flash
Image quality
Resolution in AF
Resolution in "Macro"
Judgment standards
・ 5.2 ± 0.4 EV
(Charge for 10 seconds with the new secondarybattery and perform
measurement within 1 second.)
・ Within 6 seconds
・ Charge a new rechargeable battery for 10 seconds and carry out
full flashing within 1 second. Then, measure the time taken until
the speed light LED finishes blinking while pressing lightly the
shutter release button (including the ON/OFF time of the monitor
LCD).
・ Wrong flash must not occur.
[Check by loading/unloading a battery, giving a light shock and
operating mode buttons except S2 (release button).]
The resolution must correspond to the following values in all the
postures of the EIA J chart evaluation.
< High quality of image >
Center : 1150 TV pcs or more.
Periphery : 750 TV pcs or more.
・ Take a picture on condition that aperture is "open" in the
AUTO mode and image quality priority mode.
・ Equip the 5100K viewer with a chart on condition that the
distance of 0.3m or more is set for the whole area and shoot an
object in the full range of angle of view.
・ Then, open the recorded image data file through Photoshop and
check the resolution visually.
・ Check each posture and the difference of zoom reciprocation.
・ Take a picture in each quality mode.
・ Measure the TV resolution lines at center.
Center : 950 TV lines or more.
(Take a picture at "close" distance W and T and in the high image
quality mode.)
(Check the resolution at "close" distance (W(Z00) ～ Z01 : 10cm,
Z03 : 15cm, Z06・Z08・Z11 : 40cm and T (Z12) : 60cm).)
- R ･ S20 -
INC
VMA22024-R.3749.A
Remarks
Flash meter
Secondary battery
Stop watch
Secondary battery
Secondary battery
EIAJ chart
Photoshop
Siemens chart
EIAJ chart
Photoshop
Siemens chart