Public Mode (Hotel Mode) - Sharp LC-37AD5E Service Manual

LC-37AD5E

[11] Public Mode (Hotel Mode)

1. How to Enter in the Public Mode (Hotel Mode).
Turn on the power and enter in the Adjustment Process mode (ADJ1 or Service Mode) as usual.
In the [INIT], Page 2/11 of Service, turns ON the Public Mode option.
Turn off TV by pressing Main Power switch.
While pressing "VOL+" and "P^" keys at the same time, press Main Power switch for more than 2 seconds.
After this sequence the TV will turn on showing the Public Mode setting screen as follows:
Is possible to select each item of function by pressing cursor UP/DOWN keys on the remote control or CH(
DTV)
The setting position of each item of functions is made by pressing cursor RIGHT/LEFT keys on the remote control or VOL (+)/(-) keys on the LCD TV.
Select EXECUTE position after you set all function, and press cursor RIGHT/LEFT keys on the remote control or VOL (+)/(-) keys on the LCD TV for
confirmation.
2. Public Mode Settings.
1. POWER ON FIXED [VARIABLE
When it is set to "FIXED" the TV is impossible to be switch off by Main Switch or Remote Control.
2. MAXIMUM VOLUME [0
Is possible to set the maximum volume at limited level.
3. VOLUME FIXED [VARIABLE
Is possible to fix the sound volume at limited level.
When "FIXED" is selected the sound volume before limited is fixed.
4. VOLUME FIXED LEVEL [0
If "FIXED" has been selected, is possible to set a fixed volume at the level that is chosen.
5. RC BUTTON [RESPOND
If "NO RESPOND" is selected, the remote control keys are inoperative.
6. PANEL BUTTON [RESPOND
If "NO RESPOND" has been selected, the set's keys remain deactivated (Except POWER key).
7. MENU BUTTON [RESPOND
If "NO RESPOND" has been selected, "MENU" key, of remote control, is inoperative.
8. ON SCREEN DISPLAY [YES
If "NO" has been selected, the On Screen Display does not appear.
9. INPUT MODE START [NORMAL → TV (X) → DTV → INPUT1 → INPUT2 → INPUT3 → INPUT4 → INPUT5
When any other item than "NORMAL" has been selected, the sets will start in a selected input mode at the next power-on.
10.INPUT MODE FIXED [VARIABLE → FIXED]
"FIXED" has been selected, any channels and input modes other than those selected at the start mode cannot be picked up.
11.RESET
Cancel all Public Mode settings. (It returns to the factory settings)
12.EXECUTE
Select this item, and press cursor RIGHT/LEFT keys on the remote control or VOL (+)/(-) keys on the LCD TV for confirmation the functions set-
tings.
FIXED]
60]
FIXED]
60]
NO RESPOND]
NO RESPOND]
NO RESPOND]
NO]
3 – 22
)/( ) keys on the LCD TV. (Except
]