Sharp LC-37AD5E Service Manual page 27

• How to setup the "Winupload" software for the first time:
1. Start "Winupload". It will appear the following picture.
2. Select the most suitable RS232 Serial Port from "Port Setting" - "Process" Menu.
3. Select the following settings from "Port Settings" Menu.
Bits Per Second: 115200
Parity: None
Data bits: 8
Stop bits: 1
Hardware Flow Control: OFF
• Procedure for updating the TV set.
1. Switch off the TV set to be updated, in DTV mode.
2. Start "Winupload". It will appear the following picture on PC.
3 – 9
LC-37AD5E