Installation Servicing Space - Daikin Altherma EDHQ011BB6V3 Installation Manual

For E(D/B)L only. Follow the procedure as described below for
modifying the position of the air thermistor (R1T). The thermistor
fixture is delivered in the accessory bag.
INFORMATION
Spare thermistor fixing plate is delivered in the
accessory bag.
2
1
5
8
E(D/B)(H/L)Q011~016BB
Unit for air to water heat pump system
4PW67904-1 – 01.2011
3
4
10
11

6.2. Installation servicing space

The numerical figures used in the figures represent the dimensions in
mm.
(Refer to "6.4. Precautions on installation" on page
Precaution
(A) In case of non-stacked installation
Suction side obstacle
Discharge side obstacle
Left side obstacle
Right side obstacle
Top side obstacle
NOTICE
Minimum distance B1 in
required for correct operation of the unit. Required
space for servicing though is 300 mm.
16)
figure 1
Obstacle is present
1 In these cases, close the
bottom of the installation
frame to prevent the
discharged air from
being bypassed
2 In these cases, only
2 units can be installed.
This situation is not
allowed
figure 1 mentions the space
Installation manual
14