AEG Voxtel D550BT Quick User Manual page 21

10.4.4 Set the auto answer
If you turn on the Auto Answer, you can answer a call automatically
by just lifting the handset off the base or charger, without having to
press any key.
OK
Press and / to select "HS SETTINGS".
OK
Press and / to select "AUTO ANSWER".
OK
Press and / to turn on or off the auto answer feature.
OK
Press to confirm.
10.5 Base Settings
10.5.1 Change the Flash time
You may need to change the flash time if your phone is connected to
a PBX (Private Exchange) that requires a different recall timing. The
flash time options are Short (the default value of 100ms), Mid (300ms)
or Long (600ms).
OK
Press and then / to select "BS SETTINGS".
OK
Press and then / to select "FLASH TIME".
OK
Press and then / to select your desired flash time (SHORT,
MID, LONG, with the current setting indicated by an asterisk to the
right).
OK
Press to confirm the setting.
10.6 Registration
Important:
When you purchase your phone system, all handsets are already
registered to your base, so you do not need to register them.
Handset registration is only necessary when you buy extra handsets or
if a handset has become faulty.
You can register additional handsets to have up to five handsets per
base unit, with each handset's number (1 to 5) shown on its display.
To register a new handset to your base:
Press and hold
put the base station into registration mode. It will stay in registration
mode for about 1 minute, so the following handset sequence must
be completed within this time.
OK
Press and / to select "REGISTRATION".
OK
Press to display "ENTER PIN".
on the base station for more than five seconds, to
21