Addonics Technologies CFASTD5 User Manual page 7

Overwrite
Overwrite is used to overwrite the data of the hard disk, it will erase all HDDs connected to the duplicator
(including Source HDD). There are 3 sub-options: One pass, 3 pass and 7 pass.
Choose option 9 from the menu:
Press ENT to access option. By default it is One pass Use the Up and Down arrow keys to choose
other options.
Press ENT to access option. By default it is set to No. Use the Up and Down arrow keys to choose
Yes.
Press ENT and the LCD will show the following info.
Setup
Setup allows various system settings to be changed. There are 12 sub-options:
Language, Copy Size, Startup Menu, Auto Compare, Button Sound, Device Info,
System Info, Fast Copy, Auto Start Drive, Auto Start Timer, Tolerance Size and
Boot Time Delay.
Choose option 8 from the menu:
Language
This option is used to select the system's language support. By default this is set to English. Press
ENT to change the Language settings.
www.addonics.com
9. Overwrite
9-01. Overwrite
One pass
Wipe all data.
Continue? No
In Process
Elapsed 01:00
10. Setup
Language
English
Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/