Table of Contents
Advertisement
Speakers
Description
Speakers (include left and right speakers and cables)
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
components:
a.
Battery (see
b.
WLAN (see
c.
System board (see
Remove the speakers:
1.
Release the speaker cables from the retention clips (1) and routing channels built into the
base enclosure.
2.
Remove the speakers (2).
Reverse this procedure to install the speakers.
Keyboard/top cover on page
Battery on page
30).
WLAN module on page
31).
System board on page
22), and then remove the following
35).
Component replacement procedures
Spare part number
792913-001
37
Advertisement
Table of Contents
