Table of Contents
Advertisement
b.
Remove the two Phillips PM2.0×2.2 broad head screws (2) that secure the display panel to the
display enclosure.
c.
Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of
the display bezel until the bezel disengages from the display enclosure.
d.
Remove the display bezel (4).
The display bezel is available using spare part number 800057-001.
7.
If it is necessary to replace the webcam/microphone module:
Component replacement procedures
39
Advertisement
Table of Contents
