Table of Contents
Advertisement
To change individual programmes by
re-programming
Programmes can be changed individually to
accommodate different wash processes and
methods.
20 Programmable functions can be changed
with up to 4 Options.
Before starting:
The on-site mains switch must be switched
on.
A previous programme must be completed.
The drum door must be open.
All the other buttons must be inoperative, i.e.
not pushed in.
The programme selector must be at the
" r End" position. Spin speed selector can
be at any position.
M.-Nr. 06 006 840
Programme changes
To access programming mode
^ After the drum door is shut the "+i with
pre-wash" button must be pressed in and
released twice within 4 seconds.
- A "
" (for Programming) appears in the
display.
- The programme sequence indicators
"Pre-wash" and "Main wash" flash.
- Re-programming can be carried out (see
example).
19
Hide quick links:
Advertisement
Table of Contents
