Table of Contents
Advertisement
Programme changes
To change individual programmes by re-
programming
Programmes can be changed individually to
accommodate different wash processes and
methods.
20 Programmable functions can be changed
with up to 4 Options.
Before starting:
The on-site mains switch must be switched
on.
A previous programme must be completed.
The drum door must be open.
All the other buttons must be inoperative, i.e.
not pushed in.
The programme selector must be at the "r
End" position.
To access programming mode
After the drum door is shut the "+i with
pre-wash" button must be pressed in and
released twice within 4 seconds.
- A "P " (for Programming) appears in the dis-
play.
- The programme sequence indicators "Pre-
wash" and "Main wash" flash.
- Re-programming can be carried out (see
example).
17
M.-Nr. 05068971/03
Hide quick links:
Advertisement
Table of Contents
