Selecting A Programme With A Coin Unit In Use; Delay Start - Miele W 6073 Operating Instructions Manual

Additional functions
Programmable functions
It is possible to programme additional func-
tions or change programme sequences. See
Programme changes.
Any changes to the standard machine ver-
sion must be noted on a card left with the
machine as a record for any subsequent
servicing work. This is of particular impor-
tance for the service technician, when elec-
tronic units may need to be exchanged.
Coin operating mechanism / coin unit
Selecting a programme with a coin
unit in use
^ Open the on-site stopcock(s). Switch on
the on-site mains switch.
^ Select a programme and temperature.
m "Starching", w "without final spin" and
d "Delay start" are not available with coin
operation.
^ Add detergent and any fabric conditioner.
^ Insert coins/tokens.
^ Press the " h Start" button.
Coin unit C 5002, C 5003, C 4060
Coins or tokens are "lost" if any of the follow-
ing are done after the coins have been in-
serted but before the " h Start" button has
been pressed:
– the machine door is opened,
– the programme selector has been turned
past " r End" to another programme.
– a programme is interrupted for more than
20 seconds with the coin time counter.
Note for the user:
Coins and tokens should be emptied on a
regular basis to ensure the coin box does
not get jammed full.
18

Delay Start

After the drum door has been shut and a
programme chosen the "m min Time" light
flashes as a reminder of the "Delay start" op-
tion.
With the "d Delay start" button a delay of up
to 9 hours 30 minutes can be pre-selected,
in 30 minute steps, and beyond this in
one-hour steps up to 24 hours.
After the delay start time has been set, press
the "h Start" button to confirm the com-
mand. The time display counts down show-
ing how many hours and minutes it is until
the programme starts automatically.
"Delay start" can be cancelled before the
"h Start" button has been pressed by turn-
ing the programme selector to "r End". At
the end of the delay period the programme
starts and the "m min Time" indicator light
goes out. The "Time min." / "Temperature
display shows the water temperature until
the drain valve opens at the end of the Main
wash. From this moment to the end of the
programme the time left is shown.
o C"
M.-Nr. 06 006 840