Door Chim E Fe A T Ure; Dow Nloa Ding Ena Ble - DSC Power832 User Manual

Door Chim e Fe a t ure

The door chime feature is used, while the panel is disarmed, to provide a tone from the keypad each
time a door or window is opened or closed. The doors and windows which will provide this indication
are programmed by your installer.
To activate the door chime from an LED Keypad:
Enter [ ✱ ][4] to turn the door chime feature ON and OFF. When the command is entered, the keypad
buzzer will beep 3 times if the door chime feature is enabled and will sound one long beep if it is
disabled. Press [#] to return to the Ready state.
To activate the door chime from an LCD Keypad:
Start with the panel in the disarmed mode, press [
Press [
Press (*) For<>
the Ready state.
Door Chime
K e ypa d Opt ions
All Keypads
Keypad Buzzer Control
There are 21 different keypad sounder tones available for the Power832 keypads. From an LCD
keypad, enter [ ✱ ][6] [Master code], then use the arrow (< >) keys to scroll to the message "Keypad
Buzzer Control." Press [
sound. Press [#] to exit. This feature can be accessed from an LED keypad by pressing and holding
the [ ✱ ] key.
LCD Keypads Only
Language Selection
The displayed language of the keypad can be changed by pressing and holding both of the arrow (< >)
keys simultaneously. This will cause the keypad to enter the Language Selection mode. Scroll to the
desired language and press the [
The following three options are accessed by entering [
keys to scroll to the appropriate message and press [
Brightness Control
When this option is selected, the keypad will allow you to scroll through 10 different backlighting
levels. Use the arrow (< >) keys to scroll to the desired backlighting level and press the [#] key to exit.
Contrast Control
When this option is selected, the keypad will allow you to scroll through 10 different LCD display contrast
levels. Use the arrow (< >) keys to scroll to the desired contrast level and press the [#] key to exit.
View Event Buffer
The panel will store the last 128 events which occurred on the system. To view the event buffer, select
the "View Event Buffer" prompt from the user functions list. The keypad will display the event number,
partition, time and date of each event. To toggle to the event name, press the [
>) keys to scroll through all of the events in the buffer. When you have finished viewing the events,
press [#] to exit.

Dow nloa ding Ena ble

To enable a six-hour downloading window from any system keypad, enter [
During this time, the panel will answer incoming downloading calls. For more information, please ask
your installer.
14
✱ ] or [4] to enable or disable the Door Chime feature. Press [#] to return to
✱ ] to select the option. Use the arrow (< >) keys to scroll to the desired buzzer
✱ ] key. This will select the new language and restart the keypad.
✱ ] to enter the function list, then scroll to find...
✱ ] [6] [Master code]. Use the arrow (< >)
✱ ] to select.
✱ ] key. Use the arrow (<
✱ ] [6] [Master code] [5].