Renault Trafic Driver's Handbook Manual page 193

REAR BENCH SEATS: functions
1
A
5
Depending on the vehicle, there may
be two rear bench seats: bench seat 2
(2nd row of seats) and bench seat 1
(3rd row of seats).
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
(1/4)
2
Bench seat 2
Insert the buckles 3 into the housings 4
before moving the seatback(s).
To assist with access to the last row
(bench seat 1), move control 5 down-
wards (movement A) to tilt the bench
seat back 2.
Remember to lock the seat belt in place
once more when a passenger is oc-
cupying the seat.
3
4
belts are locked in their unit cor-
rectly.
Ensure that the bench seats
are locked in place correctly
when refitting them.
Check that the side seat
3.31