srx.book Page 72 Monday, June 8, 2009 8:28 AM
9-72
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Unwrap the sealant hose.
2. Press the canister release button.
3. Pull up and remove the canister.
4. Replace with a new canister
which is available from your
dealer/retailer.
5. Push the new canister into place.
Storing the Tire Sealant
and Compressor Kit
This vehicle may have a tire sealant
and compressor kit in place of a jack
or spare tire. It is located in a foam
container in the rear compartment
storage area. See Cargo
Management System on page 3-5.
Tire Changing
Removing the Spare Tire and
Tools
To access the spare tire and tools:
1. Open the liftgate. See Liftgate
(Manual) on page 1-12 and
Liftgate (Power) on page 1-13 for
more information.
2. Press on the bottom of handle
assembly to unlatch it and lift up
on the handle.