Bluetooth Pairing - Cadillac SRX 2010 Owner's Manual

srx.book Page 59 Monday, June 8, 2009 8:28 AM
Bluetooth (Navigation)
For information about how to
navigate the menu system using the
infotainment controls, see
"Overview" under Introduction, in the
Navigation supplement.

Bluetooth Pairing

To make calls with a Bluetooth cell
phone through your vehicle, it must
be paired to the vehicle's Bluetooth
system first and then connected to
the vehicle before it can be used.
Refer to the cell phone
manufacturer's user guide for
Bluetooth pairing instructions. If a
Bluetooth phone is off or not
connected, calls will automatically be
®
made using the OnStar Hands-Free
Calling feature, if available. Refer to
the OnStar owner's guide for more
information about OnStar
Hands-Free Calling.
The pairing process can be started
by using the voice recognition
system or the controls on the
infotainment system.
Pairing Information:
• Up to five cell phones can be
paired to the Bluetooth system.
• The pairing process is disabled
when the vehicle is moving.
6-59
• The Bluetooth system
automatically links with the paired
cell phone in the order the phones
are listed in the device list.
• Only one paired cell phone can be
connected to the vehicle's
Bluetooth system at a time.
• Pairing should only need to be
completed once.
Pairing a Phone
1. Press the CONFIG hard key
repeatedly until the Phone menu
is shown or touch the Phone tab
on the screen.