Wiper Blade Replacement - Cadillac SRX 2010 Owner's Manual

srx.book Page 27 Monday, June 8, 2009 8:28 AM
Park on a fairly steep hill, with the
vehicle facing downhill. Keeping your
foot on the regular brake, set the
parking brake.
• To check the parking brake's
holding ability: With the engine
running and the transmission in
N (Neutral), slowly remove foot
pressure from the regular brake
pedal. Do this until the vehicle is
held by the parking brake only.
• To check the P (Park)
mechanism's holding ability: With
the engine running, shift to
P (Park). Then release the
parking brake followed by the
regular brake.
Contact your dealer/retailer if service
is required.

Wiper Blade Replacement

Windshield wiper blades should be
inspected for wear or cracking. See
the Maintenance Schedule for more
information.
It is a good idea to clean or replace
the wiper blade assembly on a
regular basis or when worn. For
proper windshield wiper blade length
and type, see Maintenance
Replacement Parts on page 10-4.
Notice: Allowing the wiper blade
arm to touch the windshield when
no wiper blade is installed could
damage the windshield. Any
damage that occurs would not be
covered by your warranty. Do not
allow the wiper blade arm to touch
the windshield.
9-27
Front Wiper Blade
Replacement
To replace the wiper blade assembly:
1. Pull the windshield wiper
assembly away from the
windshield.
2. Press the button in the middle of
the wiper arm connector, and pull
the wiper blade away from the
arm connector.
3. Remove the wiper blade.
4. Reverse steps 1 through 3 for
wiper blade replacement.