Limited-Slip Rear Axle; Selective Ride Control - Cadillac SRX 2010 Owner's Manual

srx.book Page 34 Monday, June 8, 2009 8:28 AM
8-34
d
If comes on and stays on, reset the
system by:
1. Stopping the vehicle.
2. Turning the engine off and
waiting 15 seconds.
3. Starting the engine.
If d still comes on and stays on, the
vehicle needs service.
TCS/StabiliTrak Button
d
is located on the console.
StabiliTrak Off Light
TCS Off Light
StabiliTrak can be turned off if
needed by pressing and holding
i
until g and come on the instrument
panel. When StabiliTrak is turned off,
the system will not assist with
directional control of the vehicle or
limit wheel spin. Driving should be
adjusted accordingly. Press and
d
release again to turn the system
back on.
If cruise control is being used when
StabiliTrak activates, cruise control
will automatically disengage. Press
the cruise control button to reengage
when road conditions allow. See
Cruise Control on page 8-35 for
more information.

Limited-Slip Rear Axle

Vehicles with a limited-slip rear axle
can give more traction on snow, mud,
ice, sand or gravel. When traction is
low, this feature allows the drive
wheel with the most traction to move
the vehicle.

Selective Ride Control

d
The vehicle may have a ride control
system called Selective Ride Control.
The setting can be changed at any
time. Based on road conditions,
steering wheel angle and the vehicle
speed, the system automatically
adjusts to provide the best handling
while providing a smooth ride. The
Tour and Sport modes will feel similar
on a smooth road.
To switch from TOUR to SPORT
mode, move the shift lever to the left
while the transmission is in D (Drive)
TOUR: Use for normal city and
highway driving. This setting
provides a smooth, soft ride.