Airbag Readiness Light - Cadillac SRX 2010 Owner's Manual

srx.book Page 18 Monday, June 8, 2009 8:28 AM
4-18
Once the passenger seatbelt is
buckled, the corresponding seat belt
symbol in the DIC turns green. There
are no seat position sensors in the
seat. If a seatbelt is not initially
buckled, the cluster continues to
show the gray seatbelt icon.
While the vehicle is moving, if a
second row passenger that was
previously buckled becomes
unbuckled, a full screen warning
displays with the corresponding seat
belt indicator flashing red. A chime
may sound.
Acknowledge warning messages by
pressing any of the DIC switches.

Airbag Readiness Light

This light shows if there is an
electrical problem. The system check
includes the airbag sensor, the
pretensioners, the airbag modules,
the wiring and the crash sensing and
diagnostic module. For more
information on the airbag system,
see Airbag System on page 2-27.
The airbag readiness light comes on
and stays on for several seconds
when the vehicle is started. Then the
light goes out.
If it stays on after the vehicle has
been started or comes on while
driving, the airbag system may not
work properly. Have the vehicle
serviced right away.
{
WARNING
If the airbag readiness light stays
on after the vehicle is started or
comes on while driving, it means
the airbag system might not be
working properly. The airbags in
the vehicle might not inflate in a
crash, or they could even inflate
without a crash. To help avoid
injury, have the vehicle serviced
right away.