Device Use - wallas XC Duo Installation, Operation And Service Instructions

Device use

Ignition
The stove turns on and heats automatically.
The stove turns on when the power switch (3) is continuously pressed for at least 2
seconds, and the power indicator light (4) turns on, notifying that the stove is ready
for use. The stove switches to its normal mode when the switch is released after 2
seconds of pressing and the yellow heating indicator light (7) turns on.
The whole process takes about 11 minutes.
INDICATIVE TEMPER-
ATURE SETTINGS
FOR THE THERMO-
STAT IN HEATING
MODE
1. ~ 5 °C (~ 41 °F)
2. ~ 11 °C (~ 52 °F)
3. ~ 17 °C (~ 63 °F)
4. ~ 23 °C (~ 73 °F)
5. ~ 29 °C (~ 84 °F)
6. ~ 35 °C (~ 95 °F)
1.
2.
3.
4.
D30101D
XC Duo
Operation
Please note that there may come very small start odor during the
ignition.
If you note any odor during the operation (after 5 min. from the start),
the unit or installation is not in order. In such case please contact
your supplier.
~ 20 °C
(~ 68 °F)
1
5
Combustion indicator
Temperature adjustment / Power control
Heating switch
Power indicator
- 63 -
2 3 7
6 4
5. Thermostat indicator
6. Thermostat sensor
7. Heating indicator
en en
-
490541G