Dimensions And Wet Connections (Optional) With A Single Boiler - Immergas VICTRIX 50 User Manual

4

DIMENSIONS AND WET CONNECTIONS (OPTIONAL) WITH A SINGLE BOILER

1"
M
NOTE: Unlike the appliance, the ISPESL safety kit and the
three-way valve kit (electric valve motor) have the IPX4D
electrical protection degree. If the appliance is installed ou-
tdoors, these safety devices and components must therefore
be adequately protected.
Immergas declines all liability if the installer fails to use the
genuine ISPESL-approved devices and kits manufactured by
Immergas, or uses them improperly.
The sensitive parts of the automatic thermal regulating and
blocking switches and those of the thermometer (not part of
the standard supply provided with the generator) must be
1" 1/2
1"
1" 1/2
R
2" 1/2
VICTRIX 50
positioned as described in the installation instructions, in
compliance with the provisions given in the "R" file.
For ISPESL planning reasons, an ISPESL-approved pressure
gauge must be added when the Immergas safety kit is instal-
led (as part of the standard supply, the boiler comes already
equipped with an ISPESL-approved 4-bar safety valve and
drain funnel).
The system return is pre-engineered with an expansion tank
connection.
4