Philips 200WB7EB/27 Service Manual page 56

56 200WB7 LCD
4.6 White color adjustment
There are three factory preset white color 9300K, 6500K, sRGB.
Apply full gray64 pattern, with brightness in 100 % position and the contrast control at 50 % position. The 1931 CIE
Chromaticity (color triangle) diagram (x,y) coordinate for the screen center should be:
9300K CIE coordinates
6500K/ sRGB CIE coordinates X = 0.313 ± 0.020
5. Mechanical characteristics
5.1 Cosmetic - Philips ID
5.2 Mechanical data files - ProE files required
5.3 Location of Philips logo - Per Philips make-up sheet
5.4 Gap between panel and front bezel < 1.2 mm
5.5 Location of Control icons - Per Philips make-up sheet
Front side: - tbc
Rear : - tbc
5.6 Color for resin/paint - Per Philips make-up sheet
5.7 Resins
RoHS required
WEEE required.
Resin type/selection refer to Project Book Section 7.2 Plastic material.
5.8 If paint is used
RoHS required
WEEE require
5.9 Plastic mold tooling
Tooling to be designed to minimize cosmetic defects induced by molding process (sink, blush, weld lines, gate
marks, ejector marks, etc.).
Painting to cover up cosmetic defects due to molding is strongly discouraged.
5.10 Plastics flammability
All Plastics to be Flame Retardant UL 94-V0 or Better (if monitor weighs less than 18kg; UL94-V0 is OK).
All major plastic parts (bezel, back cover, base) need to be molded from same resin.
5.11 Texture/Glossing of housing
The texture area and texture no should follow Philips make-up sheet.
The exterior surfaces shall have a uniform texture.
Philips must approve the mold texturing.
Detail document for texture refer to UAN-D249.
< = 20 gloss units
5.12 Tilt and swivel base
Tilt angle
Swivel angle
High Adjustment : 130mm
Portrait Display : 90 ° CW
5.13 Label
Regulatory label / Carton label should follow Philips requirement. Detail document refer to Philips Engineering Reference
Book.
5.14 Product dimension / Weight
2006-03-03
Kurtz Ko
GENERAL PRODUCT SPECIFICATION(Continued)
X = 0.283 ± 0.020
Y = 0.297 ± 0.020
Y = 0.329 ± 0.020
X = 0.313 ± 0.020
sRGB CIE coordinates
Y = 0.329 ± 0.020
: -5 ° max. forward , +25 ° min. backward.
: +/- 45 °
20.1 inch TFT WSXGA LCD Monitor
TYPE : 200WB7EB/27
BRAND : PHILIPS
2006-03-03
8639 000 16912
12 590
9