Philips 200WB7EB/27 Service Manual page 23

20 inch tft wsxga lcd colour monitor
Hide thumbs Also See for 200WB7EB/27:
Table of Contents

Advertisement

8.
Click Next , bring up Fig. 43.
- Click Finish to exit the Step window.
- Serial number can be filled up at this moment (for example, TY
123456).
NOTE: You must modify the Serial NO. In step 9, otherwise the Serial
NO. In OSD Couldn't be modified correctly.
Fig. 43
Step 5: Write DDC data
1. Configuration should be as Fig. 40. And press OK.
2. Access Factory Mode
1). Turn off monitor.
2).
[Push "AUTO" & "OK" buttons at the same time and hold them]
+[Press "power" button untill comes out "Windows screen" ]
=> then release all buttons
3).Press "OK" button, wait until the OSD menu with Characters
"HUDSON 200WB7 V011 2006/02/16" (below OSD menu) come
on the Screen of the monitor. as shown in Fig45.
Factory Mode indicator
Fig. 45
3) Push Menu to exit OSD menu.
"
"
3. Click
(Write EDID) icon from the tool bar to write DDC data.
Then wait for 20-30 seconds ,DDC data will be finished Writing.
Step 6: Save DDC data
Sometimes, you may need to save DDC data as a text file for using
in other IC chip. To save DDC data, follow the steps below:
1. Click
(Save) icon (or click "file"-> "save as") from the tool bar and
give a file name as shown in Fig. 46.
The file type is EDID46 file (*.ddc) which can be open in WordPad. By
using WordPad, the texts of DDC data & table (128 bytes, hex
code) can be modified. If DDC TEXTS & HEX Table ar completely
correct, it can be saved as *.ddc flie to re-load it into DDC IC for DDC
Data application.
DDC Instructions
2.
Step 7: Exit DDC program
Pull down the File menu and select Exit as shown in Fig. 47.
Fig. 44
Step 8: Turn off the monitor, exit the factory mode.
Serial Number Definition
BZ000500000001
BOM Code
Panel Supplier
AUO
CPT
LPL(LG)
QDI
CMO
B Z 4 A 0 6 0 1 0 0 0 0 0 1
Fig.46
Click Save.
Fig. 47
SERIAL NO
YEAR/WEEK
BZ CODE(TY--CHUNGLI,VN--HUNGARY(SZR),
BZ--SUZHOU,DS--DONG GUAN)
CODE
1
2
3
4
5
SERIAL NO
YEAR/WEEK
SERVICE VERSION CHANGE CODE
BOM CODE(BILL OF MATERIAL)CODE
SITE CODE(PRODUCTION CENTER)
BZ CODE(AR-CZECH REPUBLIC
VN-HUNGARY(SZR),BZ-SUZHOU
DS-DONGGUAN)
200WB7 LCD
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents