Philips 200WB7EB/27 Service Manual page 28

28
200WB7 LCD
3 Press the AUTO to running program , the firmware be updated
as shown in Fig. 9~10.
4 Press the file --> exit to end program , as shown in Fig. 11.
ISP Instructions
If there is a warring message coming as shown in Fig 12. , you
have to check the AC power, Video cable, or Novatek MCU.
Fig. 8
5 Check the firmware version
1). Turn off monitor.
2). [Push "AUTO" & "OK" buttons at the same time and hold them]
Fig. 9
+[Press "power" button untill comes out "Windows screen" ]
=> then release all buttons.
3).Press "OK" button, wait until the OSD menu come on the
Screen of the monitor.You will find, after upgrade, the version
have already changed from The former"HUDSON 200WB7 V011
2006/02/16" to the Present "HUDSON 200WB7 test 2006/03/14"
as shown in Fig. 13 and Fig. 14.
Fig. 10
Fig. 11
4) Turn off the monitor, exit the factory mode.
Factory Mode indicator
Factory Mode indicator
Fig. 12
Fig. 13
Fig. 14