Texture/Glossing Of Housing; Tilt And Swivel Base; Label; Transportation - Philips 190SW9FB/69 Servise Manual

84 HUDSON 9

5.11 Texture/Glossing of housing

The texture area and texture no should follow Philips make-up sheet.
The exterior surfaces shall have a uniform texture.
Philips must approve the mold texturing.
Detail document for texture refer to "UN-D249", "UN-D 600".

5.12 Tilt and swivel base

Tilt angle
5.13 Kensington Lock
Must meet Kensington_slot.spec "TYE-M0004".
MMD request metal plate in Kinsington hole.

5.14 Label

Regulatory label / Carton label should follow Philips requirement.
Detail document refer to Philips Engineering Reference Book.
5.15 Product dimension / Weight (Refer to Philips approved SHT 191)
Unit dimension
Packed unit dimension
Net weight
Gross weight

5.16 Transportation

Transportation standards refer to TYE-M0002.
5.16.1 Transportation packages
Packaging and wrapping shall be sufficient to protect the product against damage or loss during shipment from
the supplier to the destination specified in the purchase order. All packaging materials are subject to test and
evaluation per TYE-M0002. The cushion material shall be constructed using EPS material.
5.16.2 Transportation Test
The overall test refers to TYE-M0002.
Vibration, drop test should be performed at ambient temperature (20°C to 23°C) and relative humidity (40% to
65%).
A. Transportation test specification for all regions except China/India
• Package test
1. Random Vibration test
2. Drop test
3. Cold Drop test (for design reference)
• Un-packed test
1. Half sine shock test (non operation)
B. Transportation test specification for China/India
•
Package test
1. Random Vibration test
2. Drop test
3. Cold Drop test (for design reference)
-5 ° +2/- 0 ° (forward)
:
+20 °+3/-0 ° (backward)
: 436.2 mm (W) * 371.8 mm(H) * 183 mm(D)
: ??? mm(W) * ???mm(H) * ???mm(D) for WW
??? mm(W) * ??? mm(H) * ??? mm(D) for China
: ?.Kg (Including I/F cable ? g)
:? Kg for WW
? Kg for China