Exterior Lamps Off; Reminder; Headlamp High/Low-Beam; Changer - Cadillac ATS 2014 Owner's Manual

Cadillac ATS Owner Manual (GMNA-Localizing-MidEast-6335741) - 2014 -
CRC - 5/20/13
6-4 Lighting
Your vehicle's windshield is dirty,
cracked, or obstructed by
something that blocks the view
of the light sensor.
Your vehicle's windshield is
covered with ice, dirt, haze,
or other obstructions.
Your vehicle is loaded such that
the front end points upward,
causing the light sensor to aim
high and not detect headlamps
and taillamps.
You are driving on winding or
hilly roads.
You may need to manually disable
or cancel the high-beam headlamps
by turning the low-beam headlamps
on, if any of the above conditions
exist.
This feature can be turned on or off.
See Vehicle Personalization on
page 5-52.

Exterior Lamps Off

Reminder

A warning chime will sound if the
exterior lamp control is left on in
either the headlamp or parking lamp
position and the driver door is
opened with the ignition off.
Black plate (4,1)
Headlamp High/
Low-Beam Changer

(Headlamp High/Low-Beam

Changer): Push the turn signal
lever away from you and release, to
turn the high beams on. To return to
low beams, push the lever again or
pull it toward you and release.
This indicator light turns on in the
instrument cluster when the
high-beam headlamps are on.