Cadillac ATS 2014 Owner's Manual page 68

Cadillac ATS Owner Manual (GMNA-Localizing-MidEast-6335741) - 2014 -
CRC - 5/20/13
3-8 Seats and Restraints
Manually Recalling Memory
Positions
If the vehicle is off, or in ON/RUN/
START but not in P (Park), press
and hold 1, 2, or to manually
recall the previously stored memory
positions. Releasing 1, 2, or
before the stored positions are
reached stops the recall.
If the vehicle is in ON/RUN/START
and in P (Park), press and release
1, 2, or to manually recall the
previously stored memory positions.
Placing the ignition in OFF before
the stored positions are reached
stops the recall.
If something has blocked the driver
seat while recalling a memory
position, the recall may stop.
Remove the obstruction; then press
and hold the appropriate manual
control for the memory item that is
not recalling for two seconds. Try
recalling the memory position again
by pressing the appropriate memory
button. If the memory position is still
not recalling, see your dealer for
service.
Automatically Recalling RKE
Memory Positions (Auto Memory
Recall)
The Auto (Automatic) Memory
Recall feature automatically recalls
the current driver s previously stored
1 or 2 position when entering the
vehicle.
Black plate (8,1)
Depending upon the Auto Memory
Recall feature enabled in the vehicle
personalization menu, memory 1
or 2 positions are recalled in the
following ways:
To activate the recall when the
ignition is off and On - Driver Door
Open is selected in the vehicle
personalization menu:
On vehicles with RKE, press
on the RKE transmitter and open
the door.
On vehicles with keyless access,
press the lock/unlock button on
the outside driver door handle
and open the driver door. The
RKE transmitter must be present
for the recall to activate.