Cadillac ATS 2014 Owner's Manual page 226

Cadillac ATS Owner Manual (GMNA-Localizing-MidEast-6335741) - 2014 -
CRC - 5/20/13
7-30 Infotainment System
Pairing
A Bluetooth-enabled cell phone
must be paired to the Bluetooth
system and then connected to the
vehicle before it can be used. See
your cell phone manufacturer's user
guide for Bluetooth functions before
pairing the cell phone.
Pairing a Phone
1. Press . The system responds
Ready, followed by a tone.
2. Say Bluetooth.
3. Say Pair. The system responds
with instructions and a four-digit
Personal Identification Number
(PIN). The PIN is used in Step 5.
4. Start the pairing process on the
cell phone that you want to pair.
For help with this process, see
your cell phone manufacturer's
user guide.
5. Locate the device named SGM
in the list on the cell phone.
Follow the instructions on the
cell phone to enter the PIN that
was provided in Step 3. After the
PIN is successfully entered, the
system prompts you to provide a
name for the paired cell phone.
This name will be used to
indicate which phones are
paired and connected to the
vehicle. The system responds
with <phone name> has been
successfully paired after the
pairing process is complete.
6. Repeat Steps 1 5 to pair
additional phones.
Black plate (30,1)
Listing All Paired and Connected
Phones
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with is connected
after that phone name.
1. Press . The system responds
Ready, followed by a tone.
2. Say Bluetooth.
3. Say List.
Deleting a Paired Phone
If the phone name you want to
delete is unknown, see Listing All
Paired and Connected Phones.
1. Press . The system responds
Ready, followed by a tone.
2. Say Bluetooth.