Cadillac ATS 2014 Owner's Manual page 188

Cadillac ATS Owner Manual (GMNA-Localizing-MidEast-6335741) - 2014 -
CRC - 5/20/13
6-2 Lighting
Turn the control to the following
positions:
(Off): Turns off the exterior
lamps. The knob returns to the
AUTO position after it is released.
Turn to again to reactivate the
AUTO mode.
AUTO (Automatic): Automatically
turns the exterior lamps on and off,
depending on outside lighting.
(Parking Lamps): Turns on the
parking lamps including all lamps,
except the headlamps.
(Headlamps): Turns on the
headlamps together with the parking
lamps and instrument panel lights.
Automatic High-Beam System
If equipped, this system turns the
vehicle's high-beam headlamps on
and off according to surrounding
traffic conditions.
The system turns the high-beam
headlamps on when it is dark
enough and there is no other traffic
present.
This light comes on in the
instrument cluster when the
automatic high-beam system is
enabled.
Black plate (2,1)
Turning On and Enabling
Automatic High Beams
To enable the automatic high-beam
system, with the turn signal lever in
the neutral position, turn the exterior
lamp control to AUTO. The blue
high-beam on light appears on the
instrument cluster when the high
beams are on.
Driving with Automatic High
Beams
The system only activates the high
beams when driving over 40 km/h
(25 mph).
There is a sensor near the top
center of the windshield, which
automatically controls the system.
Keep this area of the windshield
clear of debris to allow for best
system performance.