Flash-To-Pass; Daytime Running; Lamps (Drl); Automatic Headlamp - Cadillac ATS 2014 Owner's Manual

Cadillac ATS Owner Manual (GMNA-Localizing-MidEast-6335741) - 2014 -
CRC - 5/20/13

Flash-to-Pass

This feature allows the high-beam
headlamps to be used to signal the
driver in front of you that you want
to pass.
Pull and hold the turn signal lever
toward you to use this feature.
When this is done the following will
occur:
If the headlamps are off or in
low-beam mode, the high-beam
headlamps will turn on. They will
stay on as long as the lever is
held there. Release the lever to
turn them off.
If the headlamps are in
high-beam mode, they will go to
low beam.

Daytime Running

Lamps (DRL)

DRL can make it easier for others to
see the front of your vehicle during
the day.
The DRL will come on when all of
the following conditions are met:
The ignition is on.
The exterior lamp control is
in AUTO.
The light sensor determines it is
daytime.
The parking brake is released or
the vehicle is not in P (Park).
Black plate (5,1)
Lighting
The taillamps, sidemarker lamps,
instrument panel lights, and other
lamps will not be on.
The DRL turn off when the
headlamps are turned to or the
ignition is off.

Automatic Headlamp

System

When the exterior lamp control is
set to AUTO and it is dark enough
outside, the headlamps come on
automatically.
6-5