Table of Contents
Advertisement
6.
Tap "
".
7.
Enter the new SSID and password.
• For the SSID and password, enter from eight to
32 single-byte characters and symbols.
8.
Tap "OK".
• The new SSID and password will become effective the
next time you turn on the camera.
NOTE
• Note that after changing the SSID and password on the camera, you will also need
to change the Wi-Fi settings of the smartphone.
• If you forget your camera SSID and password, you can perform the procedure
below to return them to their initial defaults.
Turn off the camera.
1
While holding down [0] (Movie) and the shutter button on the camera, hold
2
down [p] (Power) for about six seconds.
The process is complete when the operation lamp flashes amber for about
5 seconds.
IMPORTANT!
• Using the smartphone's Wi-Fi setting screen to terminate a wireless LAN
connection will cause the camera to enter connection standby. If the camera is left
in connection standby for three minutes, it will automatically enter the REC mode or
turn off.
Connecting the Camera with a Smartphone
65
(Wireless LAN)
Advertisement
Table of Contents
