Boiler Location - Ferroli OPTIMAX 25 C Instructions For Use, Installation And Maintenance

2.2 Boiler location

The unit's combustion circuit is sealed off from
the installation room and therefore requires no
compartment ventilation.
The installation room must be suffi ciently well
ventilated to prevent any dangerous conditions
from forming in the event of even slight gas
leakage. This safety standard is required by the
EEC Directive no. 90/396 for all gas units, inclu-
ding those with a so-called sealed chamber.
Therefore the place of installation must be
free of dust, fl ammable materials or objects
or corrosive gases. The room must be dry and
not subject to freezing.
The boiler is design to be installed on a solid
wall. The wall fi xing must ensure a stable and
effective support for the appliance, using the
bracket and fi xings supplied.
If the unit is enclosed in cupboard or moun-
ted alongside, there must be space for normal
maintenance work. Fig. 2 and tab. 1 give the
minimum clearances to leave around the unit.
10
Optimax 25 C
A
fi g. 2
Table 1
Minimum
A 2,5 cm
B 20 cm
C 30 cm
60 cm
D
(via an openable panel)
A