Symbols - Fluke 771 Calibration Manual

Symbols

Table 1 explains the symbols that are used on the Meter or in this manual.
-
W
X
T
M
B
P
F
~
;
N10140
)
CAT II
300 V
info@Fluke-Direct.ca
•
When measuring, keep fingers behind the Tactile Barrier.
See Figure 1.
•
Not for use with non-insulated conductors.
To avoid damage to the Meter, do not open the Meter for
cleaning. Do not use solvents to clean it, and do not immerse it
in liquid.
Do not apply around, or remove from HAZARDOUS LIVE conductors
Risk of danger. Important information. See Users Manual.
Risk of Electrical Shock
Equipment protected by double or reinforced insulation
Battery
Low Battery
Conforms to relevant European Union directives
DC (Direct Current)
Do not dispose of this product as unsorted municipal waste. Go to Fluke's web site for
recycling information.
Conforms to relevant Australian standards
Conforms to relevant Canadian and US standards
Equipment is designed to protect against transients in equipment in fixed-equipment
installations, such as distribution panels, feeders and short branch circuits, and lighting
systems in large buildings.
Fluke-Direct
WCaution
Table 1. Symbols
Milliamp Process Clamp Meter
.ca
1.800.868.7495
Symbols
3