Product Specifications - MK Diamond Products MK-101 Owners Manual, Parts List & Operating Instructions

MK-101

PRODUCT SPeCiFiCaTiONS

The MK-101 is a versatile Tile Saw. Operated and used according to this manual, the MK-101 will
provide years of dependable service.
General Specifications
The MK-101 Tile Saw is engineered as a tabletop or stand mounted wet tile saw. The saw includes a
powerful 120V totally enclosed capacitor start Baldor motor with a thermal protective overload. The
saw is capable of cutting tile up to twenty (20) inches in length, or diagonal cutting tile up to fourteen
(14) inches. The saw can cut an object three (3) inches thick in one pass.
Motor Specifications
Motor specifications for the MK-101 are listed in table below.
Thermal Overload Protection
The motor is protected by a thermal overload equipped with a manual reset.
Blade Capacity
The MK-101 uses a ten (10) inch (254mm) diameter, wet cutting continuous rim, diamond blade with
a five-eighths (5/8) inch (15.875 mm) arbor.
Tile Types
The MK-101 can cut a variety of tile types including Porcelain, Terracotta, Marble, Quarry and Slate,
or almost any other non-ferrous material.
NOTe:
The MK-101 is not designed to cut plastic or ferrous (metals) material.
J
I
H
G
F
Voltage
Overall amperage
Motor Only amperage
Frequency
RPM
Horse Power
weight
A
B
C
E
120V
13
14.5
60 Hz
3400 rpm
1.5 hp
92 lbs
A Motor
B Water Pump Tube
C Blade Guard
D Cutting Table
D
E Water Basin
F Frame
G Guide Bar
H Post
I Depth of Cut Adjustment Knob
J Belt Guard
20
SaFeTY