Introduction; Intended Use; Technical Specification - Shoprider Capri S787M User Manual

Introduction

Congratulations on your purchase of the ROMA Shoprider
This scooter incorporates the latest innovative designs. The ROMA Capri can
be used in confined spaces both indoors and out. Direct drive rear transaxles
and electromagnetic brakes give a safe and efficient ride. The scooter can be
easily disassembled without tools and will fit into the boot of most vehicles for
easy transport. The detachable battery pack allows convenient charging
wherever necessary.

Intended Use

The ROMA Capri was carefully designed for indoor or outdoor use in
pedestrian areas by a single individual with limited mobility up to a maximum
weight of 100kg (16st). The acute manoeuvrability prohibits the use by
persons who are severely physically impaired or those who have balance
difficulties. Your assessor / healthcare professional will determine the
suitability of the scooter for each individuals intended use.
Note: Persons with lower body amputations should not use this device
unless evaluated with artificial limbs fitted, as stability may be
compromised due to an irregular centre of gravity.

Technical Specification

Class 1 Medical Device
Class 2 Indoor/Outdoor Vehicle
Overall Size
Length
Width
Height
Battery
Height (Folded)
Maximum user weight
Safe working slope
Weight with batteries
Max. Speed
*
Passenger weight, rough ground conditions, low temperatures and battery
condition can affect maximum range.
Seat Dimensions
956mm
548mm
895mm
2 x 12Ah
630mm
100kg / 16st
6º Battery charger (off board)
34kg
6km/h
(4mph)
3
®
Capri scooter.
Width
Depth
Seat to floor pan
Backrest height
Range
Seat to floor
420mm
410mm
340-420mm
400mm
12km (8m)*
480-530mm
2 amp