Transport And Storage; Batteries And Battery Charger 10 - Shoprider Capri S787M User Manual

Transport and Storage

The ROMA Capri is designed to be quickly and easily disassembled without
tools into sections for transportation and storage:
Guidelines for Disassembly
Follow the following for the easy disassembly of your scooter:
(Ensure the scooter is switched off before disassembling)
1. Lift the basket up and off the bracket.
2. Remove the seat as described earlier.
3. Remove the battery pack by lifting on the handle.
4. Loosen the tiller adjustment knob and lower the tiller and re-tighten the
knob. Lock the tiller by pulling the yellow lever up and to the left. Do
not carry the chassis by the tiller stem.
Assembly is the reverse of the above procedure.
The ROMA Capri is now separated into four components for easy
transportation or storage.
Batteries and Battery Chargers
Batteries
Charge the batteries completely (8-12 hours) prior to first use.
The ROMA Capri is supplied with a closed battery pack which contains two
12 Amp, 12 Volt sealed lead acid batteries#. The battery pack is situated
under the front of the seat and can be removed by lifting them away from the
chassis.*
Low temperatures, rough terrain and the weight of the user can affect battery
performance. Your battery gauge is a guide only to the level of charge
remaining in your batteries and will give its best indication while the scooter is
moving.
Note: Batteries recommended by ROMA MUST be used if they need to
be replaced. An authorised ROMA dealer must carry out battery
replacement.
10