User Manual
Replacement parts
All Entice parts, including electronic components, are securely adapted to each other and tested. This results in a
quality scooter with a long lifetime. This quality, safety and lifetime can only be preserved by using only original
replacement parts.
Not using original parts could result in decreased liability from the Entice and reduced safety. Also due of the
warranty.
All replacement parts can be ordered by your dealer at Van Os Medical B.V..
Maintenance frequency
This schedule has been made to give you a survey of the maintenance that should be done to the Entice . The
yearly maintenance should be done by your dealer.
Check
Battery charger connection
Bolts and nuts
Tire wear
Tire pressure
Wiring and connections
Clean upholstery
Illumination and indicators
Bearings
Engine
Battery poles
Clean chassis parts and covers
Driving program
Suspension
Freewheel and parking brake
Faults
The dashboard contains a status indicator. If this lights up green without blinking the Entice is ignited and there
are no problems. In case of a fault the status indicator indicates a fault by blinking codes. If the status indicator
shows a fault, the first thing to do is turn off the power of the Entice and ignite again.
If the indicator shows another fault, please count the blinks. These show a code which indicates a fault. The flash
code list below shows all the meanings of the flashes. The list also contains possible causes and an eventual
solution of the problem. If you are unable to solve the problem with help of this list, please contact your dealer.
Nu
Number of blinks
Fault
1
2
Battery voltage too low
3
Battery voltage too low
4
5
6
Gas pot not in neutral at power up
7
8
9
10
mber of blinks Fault Scooter condition Remarks
Weekly
Charge battery
Current limit time out
Brake fault
Speed pot error
Motor volts error
Other internal error
Push too fast fault
Monthly
Scooter condition
Remarks
Battery voltage lowered to less than 23.3
Driving possible
V, charge batteries soon
Battery voltage lowered to less than 16.5
Driving not possible
V, charge batteries immediately
Battery voltage increased higher than 32 V.
Driving not possible
Probably defect charger.
Detector detected shortcut in the motor.
Driving not possible
Warn dealer.
Driving not possible
Check if freewheel is connected
Driving not possible
Contact dealer
Driving not possible
Contact dealer
Driving not possible
Contact dealer
Driving not possible
Contact dealer
Driving not possible
Turn off the scooter and restart
Excel Entice
Yearly
By whom
Dealer
Dealer
User
User
Dealer
User
User
Dealer
Dealer
Dealer
User
Dealer
Dealer
Dealer
Pagina 16
Need help?
Do you have a question about the Entice 4 and is the answer not in the manual?
Questions and answers