Adjust Head Rest (Option) - Excel Entice 4 User Manual

User Manual
Excel Entice
Adjust backrest angle
The backrest angle is stepless adjustable in a sitting position up to standard 105 degrees (picture 36). By
replacing the hex bolt on the turning point this can be increased up to 135 degrees. The backrest can also be fully
flipped forward to ease transport. On the right side of the chair (left shown on picture 36) is a lever. Pull it up and
lean forward or rearward to adjust the desired backrest angle (picture 36). As soon as you reached it you release
the lever. The backrest will fixate in your position.
Picture 36
Never operate the lever when you are not in the chair. The backrest will come forward with strength.
Armrest adjustment
The armrests can be fully flipped up (picture 37). Also the angle and the armrest height are adjustable. The
armrests are fully flipped up by moving them up. he armrest angle is adjustable by the bolt on the inner side of the
armrest. You can turn this bolt further out by hand (the arm rest angle will go down) or further in (the arm rest
angle will go up). On the rear side of the arm rest tube is a turning knob. Turn it loose and adjust the arm rest to
the desired height. Fasten the knob securely.
Picture 37

Adjust head rest (option)

The head rest is adjustable in three height positions.
Seat removal
Unlock the turning system of the chair as shown on the picture below (picture 38). You can pull the chair straight
up and eventually move it around a little. Flipping back the armrests and folding down the backrest eases the
removal. The chair can be handled on the lower side, symmetrical to the seat post.
Pagina 12