Changing Coffee Brewing Time, Temperature And Language Settings - Grimac TERRY TECH Operating Instructions Manual

c h apte r 5 - ma int e n an c e
5 . 3 - C H A N G I N G C O F F E E B R E W I N G T I M E ,
T E M P E R A T U R E A N D L A N G U A G E S E T T I N G S
Standard model:
By following these simple steps, it is possible to modify single or double coffee brewing
times:
• Turn the coffee maker off at the main ON/OFF switch;
• Press the single serving button and turn on the coffee maker simultaneously (pos. I);
• Keep the button pressed for approximately 5 seconds and then release;
• The power/coffee indicator light will flash for 4 seconds and then go out: the coffee
maker is in program mode (led off);
• Press the single serving button to start dispensing coffee and then press again to
stop at the desired brewing time (when repeating brewing, this new time is memori-
sed);
• Proceed in exactly the same way to program double serving brewing times;
• Turn off the coffee maker and then turn on the coffee maker and use as normal.
N.B. Only change settings with the coffee maker in temperature.
Pod coffee maker with display feature:
You can choose the language of your
choice, temperature and brewing ti-
mes:
• Insert the chip card in the purpose
slot (ask supplier) with the chip visible
as illustrated in fig. 2;
• The prompt "LINGUA ITALIANA" (lan-
guage Italian) comes up on the di-
splay, scroll the menu using buttons
1 and 2 (fig. 2) to change language
settings, choose language and utili-
sing button 3 confirm choice;
• The prompt "COFFEE/WATER TEM-
PERATURE" will now come up on
the display: it is possible to change
coffee/water (optional accessory)
temperature settings using buttons
1 and 2 to increase or decrease
settings. To confirm temperature
setting press button 3;
1
2
3
fig. 2
2 9