General Checks; Cleaning - Grimac TERRY TECH Operating Instructions Manual

ch a pte r 4 - tr o ub l e s ho ot ing an d r e me di e s
4 . 2 - G E N E R A L C H E C K S
POWER CABLE
(230V GG 3060 - 110V GG 3057)
Check the power cable regularly and replace if it is worn or damaged.
WATER TANK
Check water level occasionally utilising the inspection slot located on the left and top up if
necessary. To top up remove the metal tank lid and fill with water as illustrated in fig. 6.
Do not use the coffee maker without water in the tank.
c ha pte r 5 - main t e na nc e
5 . 1 - C L E A N I N G
FILTER: If the coffee maker is used only occasionally, after having made the last cup of
coffee, wash the filter. To wash the filter push the lever to the right, without inserting a
coffee pod and press the coffee dispensing button for 2 to 3 seconds (fig. 4).
WARNING! the water is dispensed at an extremely high temperature.
Hazard of scalding!
This ensures that the filter remains cleaner for longer.
Nonetheless, it is good practice to clean the coffee maker thoroughly at regular intervals
with the filter removed. To remove filter with the help of screwdriver prise off the pod
holder (fig. 5).
If the filter is worn or damaged, replace it.
DRIP TRAY AND GRILLE: it is good practice to clean the drip tray and grille regularly.
Remove drip tray and grille and wash any traces of waste coffee.
Only use water to clean (fig. 1, ref. 9).
WATER TANK FILTER: the water tank is fitted with a filter to soften water and is con-
nected to the water supply tube. Do not tamper or modify this filter in anyway.
2 7