Ford 2002 F650 Owner's Manual page 228

Maintenance and Specifications
Incomplete Vehicle Label
Vehicle Rating Decal - Sample
The National Highway Traffic Safety Administration Regulations require
that a Certification Label be affixed to a vehicle and prescribe where the
Certification Label may be located. Where Ford Motor Company is the
sole manufacturer of the vehicle, the Certification Label is located on the
front door latch pillar on the driver's side. In many instances, the vehicle
is sold by Ford Motor Company to an intermediate or final stage
manufacturer who is required to affix the Compliance Label. In these
cases, the completed vehicle is manufactured in two (or more) stages by
two (or more) separate manufacturers, with the manufacture of the
completed vehicle occurring at a later date than the manufacture of the
chassis or incomplete vehicle. Consequently, the model year of the
completed vehicle may be later than the model year of the incomplete
vehicle or chassis.
228
INCOMPLETE VEHICLE MANUFACTURED BY
FORD MOTOR COMPANY
MADE IN U.S.A.
GVWR: XXXXX LB/XXXXX KG
VEHICLE IDENTIFICATION NUMBER
YG
EXTERIOR PAINT COLORS
WB TYPE-GVW
XXX XXXXXX
FGAWR
MFD. BY FORD MOTOR CO. IN U.S.A.
DATE: XXXXX GVWR:XXXXX LB/ XXXXX KG
FGAWR: XXXXXX/XXXXXXX
XXXXXXXXXXXX W/TIRES
XXXXXXXXX RIMS
AT XXX PSI COLD
THIS VEHICLE CONFORMS TO ALL APPLICABLE FEDERAL
MOTOR VEHICLE SAFETY STANDARDS IN EFFECT ON THE
DATE OF MANUFACTURE SHOWN ABOVE.
VIN: XXXXXXXXXXXXXXXXX
TYPE: XXXXXXXXXXXXXXXXXX
WB TYPE/GVW BODY TRANS AXLE EXT PNT
XXX XXXXXX XXX
71 0064
DISTRICT DSO
BODY TRANS AXLE
XXX XX XX
RGAWR
RGAWR: XXXXXXX/XXXXXXX
XXXXXXXXXXXX W/TIRES
XXXXXXXXX RIMS
AT XXX PSI COLD
REAR REAR GAWR
XXXXXXX/XXXXXXX
XXX XXX XXXX XXXXXX
∇FOHT-15294A10-GA
DSO