Ford 2002 F650 Owner's Manual page 147

Axle downshift
In order to shift from HIGH to LOW,
• Push the axle shift control down.
• Release the accelerator (while pushing the axle shift control down).
• Depress the accelerator to resume driving.
Split upshift
A split upshift is when there is an axle downshift with a transmission
upshift.
A split upshift can be done as follows:
• Depress the clutch.
• Shift the transmission, while keeping the axle shift control up in
HIGH.
• After the transmission lever movement has ended, push the axle shift
control down.
• Release the clutch.
• Depress the accelerator.
When split shifting, the axle shift control must stay UP in the
HIGH range until after any transmission lever movement.
Split downshift
A split downshift is when there is an axle upshift with a transmission
downshift.
A split downshift can be done as follows:
• Pull the axle shift control up.
• Depress the clutch.
• Shift the transmission, while keeping the axle shift control up in
HIGH.
• Release the clutch.
1
1st 1st 2nd 2nd 3rd 3rd 4th 4th 5th 6th 6th
LO HI LO HI
Split shift sequence
2 3 4 5 6 7 8
LO HI LO HI LO LO HI
Driving
9 10 11
147