Setup Flow For E-Mail Printing - Toshiba e-studio 2500c Quick Start Manual

5 SETUP FLOW

Setup Flow for E-mail Printing

E-mail printing allows users to print a file by sending the file as an E-mail message to this equip-
ment.
This equipment allows you to print a file sent to it via E-mail. This equipment will receive the
message from the POP3 account in the E-mail server and print the file.
This equipment can accept only TIFF-S, TIFF-F and TIFF-J files for printing.
Setup Flow
Connect this equipment
Set up the TCP/IP (IPv4)
Set up the IPv6
Set up the E-mail Server
64 SETUP FLOW FOR PRINTING FEATURES
Connecting to Internet
Receive print file
from POP3 server
E-mail Server
Description/Reference
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
Chapter 4 "CONNECTING TO THE DEVICE"
"CONNECTING TO THE NETWORK"
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol (IPv4)"
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the TCP/IP"
Assign the IP address, Prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"SETTING NETWORK FUNCTIONS"
"Setting the IPv6 Protocol"
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the IPv6"
Configure the POP3 account for this equipment in the incoming mail server
and DNS Server to enable to receive E-mail print file from the Internet.
Reference: Network Administration Guide
Chapter 1 "SETTING UP NETWORK SERVER"
"Setting up DNS and Mail Servers"
Internet