Toshiba e-studio 2500c Quick Start Manual page 47

Setup Flow for IPP Printing
This equipment can be used with the IPP printer connection for Windows 2000, Windows XP,
Windows Server 2003, and Windows Vista in a TCP/IP network. Even though IPP printing can
be used in the local area network, this method is commonly used to print over the Internet. If you
allow IPP printing through the Internet, you must configure the DNS server to enable users to
access this equipment over the Internet using the HTTP protocol.
This is useful when users want to print to this equipment from outside the local area network.
Setup Flow
Connect this equipment
Set up the TCP/IP (IPv4)
Set up the IPv6
Connecting over Internet
Setting up the IPP
printer connection
Description/Reference
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
Chapter 4 "CONNECTING TO THE DEVICE"
"CONNECTING TO THE NETWORK"
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol (IPv4)"
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the TCP/IP"
Assign the IP address, Prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"SETTING NETWORK FUNCTIONS"
"Setting the IPv6 Protocol"
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the IPv6"
SETUP FLOW FOR PRINTING FEATURES
Windows 2000
Windows XP
Windows Server 2003
Windows Vista
45