Features; Bluetooth Device - Q Acoustics Media BT3 Manual

Instructions
Q-BT3 Features
TOP PANEL
1. Standby / Source Select
2. Volume Down
No Light = Off
Power cord is connected but AC switch is turned OFF,
or power cord is disconnected.
Solid Red= Off (Standby)
Power cord is connected and AC switch is turned ON,
but the unit is OFF.
Solid Green = On
Analogue input (Line in 1 or Line in 2) is the active
source.
Solid White = On
Optical input is the active source.
FRONT VIEW
1. IR Sensor
The IR sensor is hidden behind the speaker grill of the active right speaker. It sees the IR control
commands output from the unit IR remote control when buttons are pressed.
This sensor MUST be unobstructed for direct line-of-sight to the remote, or the remote will not be
able to control the unit.
2. Rotating Badge
The speakers are designed to be used in both vertical and horizontal orientations to suit your
preferred setup.
When using this product in the horizontal orientation, you may rotate the Q Acoustics logo by
gently pulling and rotating the badge.
2
Long press / short press
Single press / press and hold
1
4 3
1
3. Volume Up
Single press / press and hold
4. Status LED
See LED indications below
Quick Blue Flash = On
Bluetooth input is the active source and is currently
searching for a Bluetooth device to PAIR with.
Solid Blue = On
Bluetooth input is the active source and is PAIRED with
a Bluetooth device.
Any Colour Slow Flash = On
Currently active source is MUTED.
2
8