Fitting The Furniture Doors - Miele KFN 9758 iD-3 Operating And Installation Instructions

Building in the appliance
^ Break off the protruding end of
bottom cover e. It is no longer
required.
^ Fit angled cover g onto bottom fixing
bracket c.
^ Close the appliance doors.

Fitting the furniture doors

^ A gap of 8 mm a must be set
between the appliance door and the
central fixing bracket.
^ Push fitting aids b up to the height of
the furniture door: the lower edge X
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted (see - on
the diagram).
^ Undo nuts c and take fixing bracket
d off together with the fitting aids.
62
^ Using a pencil, lightly mark a line
down the centre of the inside of the
furniture door.
^ Hang fixing bracket d with the fitting
aids onto the inside of the furniture
door. Align the fixing bracket
centrally.
^ Attach the fixing bracket securely
using at least 6 short 4 x 14 mm
chipboard screws b. (On cassette
doors only use 4 screws on the
edges).
^ Pull the fitting aids upwards to
remove them f.
^ Turn them around and fit them into
the middle slots on fixing bracket g
for safe keeping.