Making Coffee; Brewing Coffee - Melitta AromaElegance Therm Operating Instructions Manual

Hardness setting
°dH
ONLY AromaElegance
LED flash rhythm
(DECALC/HARDNESS button )
ONLY AromaElegance
GB
DeLuxe: Display
Table 1
By briefly pressing the DECALC/HARDNESS but-
ton  the display changes to flashing briefly once,
twice or three times, each time followed by a pause
(......, ......, ......).
• The settings and display are shown in table 1.
• Once you have set the desired level of water
hardness, hold down the DECALC/HARDNESS
button  again for longer than two seconds.
The red LED will go off and your settings are saved.
Melitta AromaElegance
®
• Hold down the DECALC/HARDNESS button  and
by briefly pressing the M button  set the desired
level of water hardness. The hardness level will be
shown in the display.
• Once you have set the desired level of hardness let
go of the DECALC/HARDNESS button . Your
settings are now saved.
Please note
• Water hardness cannot be programmed while brewing.
• The last water hardness level chosen remains even
after removing the power cable.

4. Making coffee

For aromatic coffee flavour and the best fit for your
filter bag in the filter holder, we recommend using
filter bag 1x4
Melitta
®

4.1. Brewing coffee

• Ensure that the appliance is connected to a power
source.
• Remove the detachable water tank by holding the
recessed grip and pulling straight up. 
• Remove the water tank lid and fill with the desired
amount of fresh water from the tap. Using the water
level indicator on the tank you can choose the
correct number of cups.
Small cup symbol = approx. 85ml coffee per cup,
large cup symbol = approx. 125 ml coffee per cup. 
• Close the tank by replacing the lid and insert the
tank back in the appliance. Please ensure that you
replace the tank upright in the appliance. The guide
rails on the appliance (left of the tank) will help you
with this. 
• Swivel the filter to the right and remove it from
the holder . You can now conveniently rest the
filter on your kitchen worktop.
filter bag 1x4
• Fold a Melitta
®
and place in the filter holder. Press the filter bag into
the filter holder by hand, to ensure the best fit. 
8
I
<7°
dH
Therm:
®
............
Therm
®
1
Therm DeLuxe
®
.
®
at the embossed seams
®
II III
14-21°
7-14° dH
dH
............ ............
2 3
• Put the ground coffee into the filter bag. The amount
depends on your personal taste. We recommend
using 6 g of ground coffee per large cup.
• Put the filter back into its holder. For this hang first
the eyelet of the filter on the top of the swivel arm
and afterwards press the round base into the clip. An
audible click tells you it is inserted properly. 
• Swivel the filter back into the appliance and place the
therm jug with closed lid  in the appliance. 
• Turn the appliance on . The green LED lights up
and brewing begins.
• To fully develop the flavour of your coffee even when
preparing less than 6 cups, the Melitta
Therm models are fitted with the Aroma Control
feature as standard. So even when preparing small
quantities of coffee you get the best aromatic coffee
experience. When making 2-5 cups press the START
button  for longer than two seconds. The green
LED flashes and brewing begins.
• The appliance turns of automatically short after
brewing. This avoids the unnecessary use of electric-
ity and saves energy. You can of course turn the
appliance off manually at any time.
• The drip stop prevents your coffee from dripping,
when you remove the pot from the appliance. 
• With the help of the detachable filter you can
dispose of the coffee filter bag simply and easily. 
4.2. Timer feature (ONLY Melitta
AromaElegance
The appliance is fitted with a timer. This allows you to
set a time at which brewing will automatically begin.
• Prepare the appliance as described in point 4.1. brewing
coffee, but without pressing the START button.
• To set the desired start time hold down the TIMER
button  and press the H and M buttons  repeatedly
to set the desired start time. This goes faster if you
hold down the H and M buttons. The first time you
programme it, the display will show 00:00.
• After letting go of the TIMER button, the current
time will show after two seconds. The chosen start
time is saved until you set a different time or remove
the appliance from the power source.
• By briefly pressing the TIMER button again, the timer
feature is activated for the next brewing process.
To show this, the white LED  lights up and the
programmed start time shows briefly in the display.
• If you wish to activate the Aroma Control for the
programmed brewing, then press the START button
 for longer than two seconds. Now as well as the
white LED, a green LED  will light up.
• The appliance automatically starts to make the
coffee at the time you have set.
IV
>21°
dH
............
4
AromaElegance
®
®
Therm DeLuxe)
®
®