Dmx Control - Ignition LED Accu PAR 64 Floor RGB+W User Manual

16. Software
Here you can see the current software from your Accu Par.
17. RESET HOLD +/-
if you press and hold + / - for more than 3 seconds, the setting SETUPDIM resets to the current
setting.

3. DMX Control

DMX Mode: (display flashes when no DMX signal is present )
Connect the signal output from your DMX controller with the XLR-in jack on the Par.
On XLR out you can connect more DMX equipment .
DMX MODE 1
channel value
1 0-255
DMX MODE 2
channel value function
1 0-255 0 = OFF ,1-255 = different colorsets (36)
2 0-255 0 = OFF, 1-255 = dimmer 1-100%
function
0 = OFF , 1-255 = different colorsets (36)
9 / 16
L E D A C C U P A R