Table of Contents
Advertisement
1. Safety instructions
FOR SAFE AND EFFICIENT OPERATION
FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperature. Avoid exposing it
Be careful with heat and extreme temperature
to direct rays of the sun or near a heating appliance.
to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow
ut it in a temperature bellow -0° C, or exceeding 45° C.
Keep away from sources of hum and noise
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact
do not open the cabinet by yourself, it might result a danger of electric shock.
do not open the cabinet by yourself, it might result a
Take care with the power cable
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure
Never pull the power cable to remove the plug from the receptacle, be sure
Never pull the power cable to remove the plug from the receptacle, be sure
to hold the plug. When not using the player for an extended period of time
to hold the plug. When not using t
be sure to disconnect the plug from the receptacle.
be sure to disconnect the plug from the receptacle.
1.1 Overhead Rigging
This Item must be built in a way that it can hold 10 times more of its weight for 1 hour without
This Item must be built in a way that it can hold 10 times more of its weight for 1 hour without
This Item must be built in a way that it can hold 10 times more of its weight for 1 hour without
causing any damages.
The installation must be secured with a secondary safety attachment. The safety attachment
has to be constructed in a way that no part of the installation can fall down
has to be constructed in a way that no part of the installation can fall down
has to be constructed in a way that no part of the installation can fall down
When rigging, de-rigging or servicing the fixture staying in the area below the installation
rigging or servicing the fixture staying in the area below the installation
rigging or servicing the fixture staying in the area below the installation
place, on bridges, under high working places and other endangered areas is forbidden.
es, under high working places and other endangered areas is forbidden.
es, under high working places and other endangered areas is forbidden.
Before taking the device in operation, the installation must be approved by an expert.
Before taking the device in operation, the installation must be approved by an expert.
Before taking the device in operation, the installation must be approved by an expert.
The operator has to make sure that safety-relating and machine-technical installations are
The operator has to make sure that safety
approved by a skilled person once a year.
d by a skilled person once a year.
stable location
he power plug soon, and contact with an engineer for repairing,
be secured with a secondary safety attachment. The safety attachment
be secured with a secondary safety attachment. The safety attachment
S T U D I O P A R Z O O M
with an engineer for repairing,
danger of electric shock.
technical installations are
3 / 11
T U D I O P A R Z O O M
Advertisement
Table of Contents
